How to Replace Frigidaire Refrigerator Water and Air Filters

A quick filter swap in your Frigidaire fridge can banish odd tastes in water and stubborn smells from leftovers – it's one of those small jobs that makes a big difference.

Frigidaire's Gallery and Premium models often feature both water and air filters for complete freshness. Water ones like PureSource Ultra II tackle contaminants, while air types such as PureAir Ultra II absorb odours with carbon tech. Competitors like Whirlpool's FreshFlow or LG's LT120F offer similar dual systems, but Frigidaire's push-in or twist designs keep things user-friendly. This guide covers the dual-filter process for Gallery/Premium lines, with steps based on current models. Always unplug the fridge first for safety, and have a towel handy for drips.

Preparing for the Replacement

Gather your new filters – PureSource Ultra II (EPTWFU01 or similar) for water and PureAir Ultra II (PAULTRA2) for air. Check your model number inside the door or on the back to confirm compatibility.

Flush the water system after install to clear carbon dust – the first few gallons might look cloudy. For air, no flush needed, but wipe the housing clean.

Replacing the Water Filter

Gallery and Premium models place water filters in the base grille or upper interior for easy reach.

Step-by-Step Process

1. Locate the housing – usually base grille (remove kickplate) or top right corner inside.
2. Push in on the old filter to release (push-in type) or twist counterclockwise (twist type).
3. Pull the old filter straight out – water might drip.
4. Remove any caps from the new filter.
5. Align and push or twist the new one in until it clicks securely.
6. Reset the filter light on the panel – hold the button 3-5 seconds.
7. Dispense 2-3 gallons to flush and prime.

This works for most 2026 Gallery French-door or side-by-side units. If flow stays slow, air pockets might linger – keep dispensing.

Replacing the Air Filter

Air filters in these models sit in the ceiling or rear wall for optimal circulation.

Step-by-Step Process

1. Open the fresh food door and find the compartment – often top rear or ceiling grille.
2. Flip or slide the cover open.
3. Pull the old filter straight out.
4. Insert the new PureAir Ultra II, matching orientation.
5. Close the cover firmly.
6. Reset the air filter indicator if your model has one.

Dual swaps take under 10 minutes – do both at once for efficiency in Gallery/Premium setups.

Common Tips and Troubleshooting

• Wipe housings during changes to prevent grime buildup.
• Test water taste post-flush – off notes mean more dispensing.
• Leaks? Re-seat firmly or check O-rings.
• Persistent odours? Clean interiors with baking soda mix.

For deeper fixes, our Maintenance, Installation, and Troubleshooting for Refrigerator Filters covers brand quirks. Curious about options? See Top Frigidaire refrigerator water filters: Reviews and compatibility or Best Frigidaire refrigerator air filters for odor control.

Wrapping Up

Replacing Frigidaire water and air filters in Gallery/Premium models follows simple push or twist steps for dual freshness. Competitors like GE or Samsung vary slightly, but Frigidaire's design keeps it accessible. Our shop has genuine and compatibles – fresher fridge awaits.